Electronic Components 90A 250VAC Motor Latching Relay

Electronic Components 90A 250VAC Motor Latching Relay

Standard Data Dimension(mm) 32×35.5×16.five
Weight ( g ) ≈35g
Speak to Arrangement 1A/1B
Contact Content AgSnOtwo
Ambient Temperature -45~+85ºC
Vibration ten~50Hz,.075mm
Shock 1000m/s²,(100g)
Specification Data Nominal Voltage 9~36VDC
Power Use <1.5W
Working Voltage 7.2V
Max. Motor Voltage 36V
Max. Switching Present 90A
Surge Current 2500A/10ms
Motor Resistance(R±15%) 60Ω
Make contact with Voltage <60mV
Make contact with Resistance <0.6mΩ
Dielectric Energy Motor to Get in touch with >4000VAC   1min
Across Open up Make contact with >2000VAC   1min
CZPTal Lifestyle >10000cycles
Mechanical Life >100000cycles
Pulse Time 100ms~150ms
Choosing-up Time <65ms
Release Time <65ms
Insulation Resistance >1000MΩ(500VDC)

          Cautions of Latching Relay:

             1.Recommendations of relay’s enter
            (1)Polarity-Make sure you examine the polarity inside of our specialized specification, if one coil then”+ -” or “- +”are wonderful,

            you can alter it by one particular pulse.If double coil then it truly is required to confirm “-+-” or “+-+”before leaving the our factory.

            (2)Driving-Please energize the relay at our advise pulse width, rated voltage for reliable overall performance, if 1.5

            times or two moments of value or reduced driving problem plz verify with our engineer.
            (3)Relays’contact standing might be transformed for the duration of transportation or set up thanks to impact of external drive,
            consequently remember to reset to the needed position.

 

            two.Suggestions of relay’s output
            (one)When picking the relay with difficult connection,remember to stay away from the exterior power on load terminals during or following

            the set up.

            (2)When the relay will be related with screw or bolts to the relays’ terminals, plz make sure your relationship is

            fixed and avoid relay from damages or other basic safety troubles thanks to temp. Rise..

            (three)The sampling signal wires of goods are constrained, make sure you do not pull or torque in the course of set up.

Electronic Components 90A 250VAC Motor Latching Relay