Tk Series Synchronous Motor for Drive Compressors and Pumps Tk3150-20 2600 3150kv 6kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk3150-20 2600 3150kv 6kv IP20

I. Overview
The big a few-phase synchronous motor for TK collection air compressor is a high-overall performance series solution specially made and produced by our organization for the load of air compressor.
This sequence of motors adopts new engineering, new supplies, new procedures, exquisite substance assortment, and refined production. It has the traits of tiny size, mild bodyweight, lovely appearance, high efficiency, reduced noise, minimal vibration, protected and dependable operation, and convenient use and maintenance.

2. Implementation expectations
GB755 Rotating Motor Rating and Overall performance
Classification of GB/T997 rotary motor construction kind, installation sort and junction box place (IM code)
GB/T1571 Three-section synchronous motor check method
GB/T1993 Rotating Device Cooling Technique
GB/T4942.one Protection class (IP) classification of the all round composition of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft middle top of 56mm and earlier mentioned
GB/T10069 Rotating Equipment Sounds Measurement Method and Restrict
JB/T8667.one CZPT Conditions of Massive A few-period Synchronous Motor Component one: TK Series
three. Standard specialized parameters
Electricity assortment: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, three hundred, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Defense amount: IP00, IP20, IP23, IP44
Insulation class: F
Quota: SI
Cooling method: IC01, IC37, IC81W
Set up method: IM7311, IM5710, IM7312, IM7315
*Can be manufactured in accordance to other parameters in accordance to consumer demands
Four, complex attributes
four.1 The structural layout is reasonable, risk-free and reliable, and the ability to step out of phase is robust.
4.2 The main insulation composition using new insulating resources has higher voltage resistance and extended motor lifestyle.
four.3 The temperature increase margin is big. The motor adopts F-course insulation, and the temperature rise is assessed according to the temperature increase limit of the B pole insulation.
four.four The safety gadget is superior and complete.
4.one.one The stator windings and bearings are outfitted with temperature detection products, which can detect, alarm and journey.
4.four.2 Shutdown place heater with anti-condensation effect.
four.five Massive inertia. Motors with different times of inertia can be created according to consumer wants.
5, framework kind
five.1 The total structure of this sequence of motors is welded with metal plates for the body, stop protect, and base plate. The motor is an unbiased cavity, and the slip ring can be developed with various defense stages in accordance to person demands.
5.two Stator: The stator frame is welded by steel plate. The motor stator outlet is led out by a substantial-voltage rubber cable. The outlet placement can be led out from the decrease element of the foundation or from the principal junction box on the facet of the motor.
The stator main is superimposed by reduced-reduction silicon steel sheets, and the core sections are divided by radial air flow ducts.
The stator winding is F quality insulation, and the temperature increase is assessed according to B grade to aid extend the support life. It adopts VPI all round dipping paint remedy, which has large electrical functionality, mechanical energy, insulation functionality, humidity resistance and thermal steadiness.
5.three The rotor magnetic pole core is created of laminated metal plates, and has different buildings these kinds of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is outfitted with a fan, which can well management the temperature rise of the rotor.
5.four Undertake seat sort spherical sliding bearing. The bearings are insulated to avert shaft currents.
Use new lubricating oil and thin-walled bearing alloy tiles, and established electromagnetic centerline indications.
5.five In accordance to person requirements, the slip ring can be designed as a positive strain air flow composition to enhance the protection of the motor. The overall size of the motor with the good strain ventilation composition of the slip ring is somewhat elevated.
6. Conditions of Use
6.one Voltage fluctuation: ±5% (It can run under ±10% beneath the circumstances of 7.three in GB755)
six.two Frequency fluctuation: ±2%
6.3 The altitude does not exceed 1000m
six.4 The optimum ambient temperature does not exceed +40ºC, and the bare minimum is 0ºC.
Seven, design description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Quantity of poles (sixteen poles)

Rated electrical power (1250KW)
A few-period synchronous motor for compressor
8. Buying instructions
eight.one Prior to positioning an order, make sure you refer to the item catalog of this series to explain the needed solution product, technical specs and other information. If there is a discrepancy amongst the specifications and the samples, please contact our firm.
8.two The motor model, rated electrical power, synchronous pace, rated voltage, rated frequency, safety level, minute of inertia, rotation path, set up variety, etc. have to be indicated when buying.
8.three The sample technical info sheet only lists the relevant data of motors with rated voltages of 6KV and 10KV. If customers need other voltage amounts, our firm can also provide relevant technological information when ordering.
8.four The technical data and proportions in the sample are only for reference when the person selects the design. The formal info will be provided by the organization right after the agreement or technical arrangement is signed.
eight.5 If there are any other specific needs, remember to provide the demands and indication the appropriate complex settlement when buying.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk3150-20 2600 3150kv 6kv IP20