Tag Archives: motor stepper

China high quality CHINAMFG Style 25mm Stepper Motor Linear Guide Rail Hgr25 with CHINAMFG Block H25c vacuum pump brakes

Product Description

Introduction:

Linear guide is consisted of rail, block, rolling elements, retainer, recirculator, end seal etc. By using the rolling elements, such as balls or rollers between the rail and block, the linear guide can achieve high precision linear motion.Linear guide block is divied to flange type and square type without flange.or Seal type block, Standard type block, Double bearing type block, Short type block. Also,linear block is divided to high load capacity with standard block lenth and ultra high load capacity with longer block length.

 

Catalogue of Linear Xihu (West Lake) Dis.ways:
1.HG SERIES IS A HIGH ASSEMBLED BALL LINEAR XIHU (WEST LAKE) DIS. RAIL;
2.EG SERIES IS A LOW ASSEMBLED BALL LINEAR XIHU (WEST LAKE) DIS. RAIL;
3.RG SERIES IS A LINEAR XIHU (WEST LAKE) DIS. WITH ROLLERS ROLLER TPYE BLOCK,WHICH CAN AFFORD HIGH LOAD;
4.MGN/MGW SERIES IS A SMALL/MINIATURE LINEAR XIHU (WEST LAKE) DIS. RAIL.

Structure of Linear Xihu (West Lake) Dis.ways:
1.Rolling cycle system: slider, guide rail, end cover, steel ball, ball holder;
2.Lubrication system: oil nozzle and tubing joint;
3.Dust-proof system: oil scraper, negative dust seal dust-proof sheet, guide rail bolt cover, metal scrap

Advantages of Linear Xihu (West Lake) Dis.ways:
1.Easy to install ,direct locking with screw and worktable;
2.Design of the ball arrange to upgrade weight bearing capacity;
3.Long life with high speed,high accuracy and linear motion;
4.High speed, low noise;
5.High rigidity ,multiple precision

Applicable Industries:
Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Retail, Printing Shops, Construction works , Advertising Company, Others.

 

Regular specifications as follows table:

HGHCA/HA Series

HGLCA/HA Series

HGWCC/HC Series

HGH15CA/HGH15HA

HGL15CA/HGL15HA

HGW15CC/HGW15HC

HGH20CA/HGH20HA

HGL25CA/HGL25HA

HGW20CC/HGW20HC

HGH25CA/HGH25HA

HGL30CA/HGL30HA

HGW25CC/HGW25HC

HGH30CA/HGH30HA

 HGL35CA/HGL35HA

HGW30CC/HGW30HC

HGH35CA/HGH35HA

HGL45CA/HGL45HA

HGW35CC/HGW35HC

HGH45CA/HGH45HA

 HGL55CA/HGL55HA

HGW45CC/HGW45HC

HGH55CA/HGH55HA

 

HGW55CC/HGW55HC

HGH65CA/HGH65HA

 

HGW65CC/HGW65HC

 

Kindly pls contact service, if you have any problem, thank you!!!!!!!!!!!!!

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Warehouse Crane, Shipboard Crane, Goods Yard Crane, Medical Equipment, Automation Equipment, Building
Material: Steel
Structure: CNC
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

HG linear guide
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

motor base

Are motor slide rails suitable for use with both AC and DC electric motors?

Yes, motor slide rails are suitable for use with both AC and DC electric motors. Here’s a detailed explanation:

Motor slide rails are mechanical components designed to support and guide the movement of motors in various applications. They are typically used to facilitate linear motion, allowing motors to be positioned or moved along a defined path. The compatibility of motor slide rails with AC and DC electric motors is primarily determined by the mechanical specifications and requirements of the specific motor and application.

The fundamental function of motor slide rails is to provide a stable and controlled movement mechanism for motors. This function is independent of the type of electric motor used, whether it is an AC motor or a DC motor. The key considerations when using motor slide rails with electric motors are related to the mechanical aspects rather than the electrical characteristics of the motors.

When selecting motor slide rails for use with electric motors, several factors need to be considered:

1. Load Capacity and Size:

The motor slide rails should be chosen based on the load capacity and size requirements of the electric motor. The rails should be able to support the weight of the motor and any additional loads. It is important to consider the size and dimensions of both the motor and the slide rails to ensure proper fit and compatibility.

2. Mounting and Integration:

The mounting and integration of the motor slide rails with the electric motor should be carefully evaluated. The slide rails should be compatible with the motor mounting brackets or any other components involved in the motor installation. Proper alignment and secure attachment of the motor to the slide rails are essential for safe and reliable operation.

3. Environmental Considerations:

The operating environment and conditions should also be taken into account when selecting motor slide rails for use with electric motors. Factors such as temperature, humidity, dust, or exposure to chemicals may affect the materials and performance of the slide rails. It is important to choose slide rails that are suitable for the specific environmental conditions in which the motor will operate.

Overall, motor slide rails can be used with both AC and DC electric motors as long as the mechanical specifications and requirements of the motors are taken into consideration. The compatibility of the slide rails with the electric motors is primarily determined by factors such as load capacity, size, mounting, integration, and environmental considerations. By selecting appropriate slide rails and ensuring proper installation, users can effectively utilize motor slide rails with both AC and DC electric motors in various applications.

motor base

How do motor slide rails enhance the ease of maintenance for electric motors?

Motor slide rails enhance the ease of maintenance for electric motors in several ways. Here’s a detailed explanation:

1. Access and Serviceability:

Motor slide rails provide convenient access to the motor for maintenance purposes. The rails allow for easy removal and reinstallation of the motor, simplifying tasks such as inspection, cleaning, lubrication, or replacement of motor components. By sliding the motor along the rails, technicians can gain better access to the motor from multiple angles, making it easier to perform maintenance tasks without the need for complex disassembly or extensive downtime.

2. Adjustable Mounting Positions:

Motor slide rails typically offer adjustable mounting positions, allowing for flexible motor positioning. This adjustability enhances maintenance by providing the ability to fine-tune the motor’s position and alignment. Technicians can easily adjust the motor’s position along the slide rails to optimize belt tension, pulley alignment, or coupling engagement. This ensures proper functioning and reduces the need for frequent maintenance adjustments due to misalignment or wear.

3. Quick Motor Replacement:

In cases where motor replacement is required, motor slide rails simplify the process. By sliding the motor along the rails, it can be easily disconnected from the power source and removed from the system. This makes motor replacement faster and more efficient, minimizing downtime during maintenance or motor failure situations. The slide rails also facilitate the quick installation of a new motor, ensuring a smooth and streamlined maintenance process.

4. Component Accessibility:

Motor slide rails improve access to other components connected to the motor. By sliding the motor along the rails, technicians can easily reach and service components such as motor couplings, pulleys, belts, or gearboxes. This accessibility simplifies maintenance tasks such as lubrication, inspection, or replacement of these components, reducing the time and effort required for maintenance procedures.

5. Modular Design and Replacement:

Some motor slide rail systems feature a modular design, allowing for easy replacement or upgrade of individual components. This modularity enhances maintenance by enabling the replacement of specific rail sections, mounting brackets, or other accessories, without the need for replacing the entire rail system. This reduces maintenance costs and downtime while ensuring the motor slide rails remain in optimal working condition.

6. Compatibility with Diagnostic Tools:

Motor slide rails can be compatible with diagnostic tools and condition monitoring equipment. The ease of access provided by the slide rails allows for the installation of sensors or monitoring devices to track motor performance, temperature, vibrations, or other parameters. This compatibility with diagnostic tools enables proactive maintenance, early fault detection, and efficient troubleshooting, leading to improved motor reliability and reduced downtime.

7. Safety and Ergonomics:

Motor slide rails contribute to maintenance efficiency by enhancing safety and ergonomics. The rails provide a stable and controlled environment for motor maintenance tasks, reducing the risk of accidents or injuries. The ability to slide the motor along the rails significantly reduces the physical strain on technicians, as they can access the motor at a comfortable working height and angle, minimizing fatigue and improving overall maintenance efficiency.

Overall, motor slide rails enhance the ease of maintenance for electric motors through improved access and serviceability, adjustable mounting positions, quick motor replacement, enhanced component accessibility, modular design and replacement options, compatibility with diagnostic tools, and improved safety and ergonomics. These features contribute to streamlined maintenance procedures, reduced downtime, and improved motor reliability, ultimately enhancing the overall performance and longevity of electric motors.

In summary, motor slide rails play a crucial role in enhancing the ease of maintenance for electric motors by providing convenient access, adjustable mounting positions, quick replacement options, improved component accessibility, compatibility with diagnostic tools, and improved safety and ergonomics.

motor base

What materials are commonly used in the construction of durable and reliable motor slide rails?

In the construction of durable and reliable motor slide rails, several materials are commonly used. Here’s a detailed explanation:

1. Steel:

Steel is one of the most widely used materials for motor slide rails due to its excellent strength, durability, and load-bearing capabilities. Steel slide rails offer high rigidity and resistance to bending or deformation, ensuring stable and secure motor installations. Different types of steel, such as carbon steel or stainless steel, can be utilized based on the specific application requirements and environmental conditions.

2. Aluminum:

Aluminum is another popular material choice for motor slide rails, especially in applications where weight reduction is a consideration. Aluminum slide rails offer a good balance of strength and lightweight characteristics. They are corrosion-resistant, making them suitable for indoor and outdoor installations. Aluminum slide rails are commonly used in applications where weight reduction, ease of handling, and corrosion resistance are important factors.

3. Cast Iron:

Cast iron is known for its exceptional strength and durability, making it suitable for heavy-duty motor applications. Cast iron slide rails provide superior load-bearing capabilities and resistance to wear and tear. They are commonly used in industrial settings where robustness and longevity are crucial. Cast iron slide rails can withstand high loads and provide stability and rigidity for reliable motor positioning and alignment.

4. Stainless Steel:

Stainless steel slide rails offer excellent corrosion resistance, making them ideal for applications where exposure to moisture, chemicals, or harsh environments is a concern. Stainless steel is highly durable, resistant to rust and staining, and can withstand high loads. These properties make stainless steel slide rails suitable for a wide range of industries, including food processing, pharmaceuticals, marine, and outdoor applications.

5. Engineering Plastics:

Certain engineering plastics, such as acetal (polyoxymethylene) or nylon, are used in the construction of motor slide rails. These materials offer good mechanical properties, such as low friction, high wear resistance, and self-lubricating characteristics. Engineering plastic slide rails are lightweight, corrosion-resistant, and can provide smooth and quiet operation. They are often utilized in applications where noise reduction, chemical resistance, or lightweight construction is desired.

6. Composite Materials:

Composite materials, such as fiberglass-reinforced plastic (FRP), are used in some motor slide rails. These materials offer a combination of strength, rigidity, and corrosion resistance. Composite slide rails are lightweight, non-conductive, and can provide excellent resistance to chemicals and environmental factors. They are commonly used in applications where weight reduction, electrical insulation, or resistance to corrosive substances is important.

The selection of materials for motor slide rails depends on various factors, including the specific application requirements, load capacities, environmental conditions, and desired performance characteristics. Manufacturers consider these factors to choose the most suitable material that ensures durability, reliability, and optimal performance of the motor slide rail system.

In summary, commonly used materials in the construction of durable and reliable motor slide rails include steel, aluminum, cast iron, stainless steel, engineering plastics, and composite materials. Each material has its specific advantages and is chosen based on factors such as strength, durability, load-bearing capacity, corrosion resistance, weight reduction, and environmental considerations.

China high quality CHINAMFG Style 25mm Stepper Motor Linear Guide Rail Hgr25 with CHINAMFG Block H25c   vacuum pump brakesChina high quality CHINAMFG Style 25mm Stepper Motor Linear Guide Rail Hgr25 with CHINAMFG Block H25c   vacuum pump brakes
editor by CX 2024-05-17

China OEM China Wholesalers Rgw45hb Ball Screw CNC Linear Guide Rail with Stepper Motor vacuum pump brakes

Product Description

 

China Wholesalers RGW45HB Ball Screw Cnc Linear Xihu (West Lake) Dis. Rail With Stepper Motor

Product Description

Linear Sliders can be divided into 3 types: roller linear guides, cylindrical linear guides, and ball linear guides. They are used to support and guide moving parts and perform reciprocating linear motion in a given direction. According to the nature of friction, linear motion guides can be divided into sliding friction guides, rolling friction guides, elastic friction guides, fluid friction guides, and other types.

Linear Xihu (West Lake) Dis.s
It mainly consists of sliders and guide rails, and sliders are mainly used in sliding friction guide rails. Linear guide rails, also known as line rails, slide rails, linear guide rails, and linear slide rails, are used in linear reciprocating motion applications and can bear a certain torque, and can achieve high-precision linear motion under high load conditions. In the mainland, it is called linear guide rail, and in ZheJiang , it is generally called linear guide rail and linear slide rail. Usually divided into square ball linear guides, double-axis core roller linear guides, and single-axis core linear guides.

The function of linear guide rail motion is to support and guide the moving parts and make a reciprocating linear motion in a given direction. According to the nature of friction, linear motion guides can be divided into sliding friction guides, rolling friction guides, elastic friction guides, fluid friction guides, and other types. Linear bearings are mainly used in automated machinery, such as machine tools imported from Germany, bending machines, laser welding machines, etc. Of course, linear bearings and linear axes are used together. Linear guides are mainly used in mechanical structures with high precision requirements. There is no intermediate medium between the moving elements and fixed elements of the linear guides, but rolling steel balls.

Application field
1. Linear guide rails are mainly used in automated machinery, such as machine tools imported from Germany, bending machines, laser welding machines, etc. Of course, linear guide rails and linear axes are used together.
2. Linear guide rails are mainly used in mechanical structures with relatively high precision requirements. There is no intermediate medium between the moving elements and fixed elements of the linear guide rails, but rolling steel balls are used. Because the rolling steel ball is suitable for high-speed motion, with a small friction coefficient and high sensitivity, it meets the working requirements of moving parts, such as tool holders and carriages of machine tools. If the force acting on the steel ball is too large, the steel ball will be preloaded for too long, resulting in increased movement resistance of the bracket.

Product Parameters

Product Name

CHINAMFG Linear Xihu (West Lake) Dis.

   Brand Name   HOTE BEARING

Model

CHINAMFG Linear Xihu (West Lake) Dis.&Block Full Sizes

MOQ

1 Piece

Packing

Original Color Box Packed

Precision

N / H / P / SP / UP

Pre-pressing

Z0 / Z1 / Z2 / Z3

Detailed Photos

 

 

 

FAQ

Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;

2>.Help customers with bearing choice, clearance configuration, product” life, and reliability analysis;

3>. Offer highly cost-effective and complete solution program according to site conditions;

4>. Offer localized program on introduced equipment to save running cost

Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;

2>.Help customers with trouble diagnosis and failure analysis;

3>. Visit customers regularly and feedback on their rational suggestions and requirements to the company.

Q3: How about your company’s strength?
1>.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request. 

2>. World-Class Bearing:
We provide our customers with all types of indigenous roller bearings of world-class quality.

3>.OEM or Non-Stand Bearings: 
Any requirement for Non-standard roller bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry. 

4>.Genuine products With Excellent Quality: 
The company has always proved the 100% quality products it provides with genuine intent.

5>. After-Sales Service and Technical Assistance: 
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.

6>.Quick Delivery: 
The company provides just-in-time delivery with its streamlined supply chain.

7>.Cost Saving: 
We provide long-life, shock-resistant, and high-reliability roller bearings with excellent quality and better performance.
Resulting in increased cost savings.

Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, Please contact us at first time, and we will immediately process

Q5: How long will you respond to our problems?
A: We will respond within 1 hour. 24 hours to solve your problem

Q6: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical
assistance with any special requirements

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Warehouse Crane, Shipboard Crane, Goods Yard Crane, Building Crane, Workshop Crane
Material: Alloy
Structure: Hook Crane
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

motor base

Are there any energy efficiency benefits associated with specific types of motor slide rails?

Yes, specific types of motor slide rails can offer energy efficiency benefits. Here’s a detailed explanation:

The energy efficiency of motor slide rails is primarily influenced by their design, materials, and features. While the slide rails themselves do not directly impact the energy efficiency of the motor, certain characteristics can contribute to overall system efficiency. Here are some factors to consider:

1. Friction and Smooth Movement:

Motor slide rails that are designed to reduce friction and enable smooth movement can contribute to energy efficiency. By minimizing frictional forces, the motor requires less energy to overcome resistance and move along the slide rails. This can result in improved overall efficiency and reduced energy consumption.

2. Lubrication and Maintenance:

Proper lubrication of motor slide rails is crucial for minimizing friction and optimizing energy efficiency. Well-lubricated slide rails can reduce wear and frictional losses, allowing the motor to operate more efficiently. Regular maintenance, including lubricant checks and replacements, ensures that the slide rails maintain their energy-efficient performance over time.

3. Design and Materials:

The design and materials used in motor slide rails can also impact energy efficiency. Certain materials, such as those with low coefficients of friction or high strength-to-weight ratios, can reduce energy losses and improve overall efficiency. Additionally, the design of the slide rails, including their shape, profile, and load-bearing capacities, can optimize the motor’s performance and minimize energy waste.

4. Damping and Vibration Reduction:

Motor slide rails that incorporate damping mechanisms or vibration-reducing features can enhance energy efficiency. Excessive vibrations can lead to energy losses and increased wear on the motor. Slide rails designed to absorb or dampen vibrations can help maintain stable and efficient motor operation, resulting in energy savings.

5. Environmental Considerations:

Specific types of motor slide rails may also offer energy efficiency benefits in certain environmental conditions. For example, slide rails that are resistant to corrosion, dust, or moisture can help maintain their performance and efficiency over time. By minimizing the impact of environmental factors, the motor can operate optimally, reducing energy waste and improving efficiency.

It’s important to note that while specific types of motor slide rails can offer energy efficiency benefits, the overall energy efficiency of a motor system is influenced by multiple factors, including motor design, control systems, and operational practices. The selection of energy-efficient slide rails should be considered within the broader context of the entire motor system to maximize energy savings.

In summary, certain types of motor slide rails can contribute to energy efficiency by reducing friction, enabling smooth movement, utilizing appropriate materials, incorporating damping mechanisms, and considering environmental factors. By selecting and maintaining energy-efficient slide rails, it is possible to optimize the performance and energy efficiency of motor systems, leading to potential energy savings over the long term.

motor base

How do motor slide rails enhance the ease of maintenance for electric motors?

Motor slide rails enhance the ease of maintenance for electric motors in several ways. Here’s a detailed explanation:

1. Access and Serviceability:

Motor slide rails provide convenient access to the motor for maintenance purposes. The rails allow for easy removal and reinstallation of the motor, simplifying tasks such as inspection, cleaning, lubrication, or replacement of motor components. By sliding the motor along the rails, technicians can gain better access to the motor from multiple angles, making it easier to perform maintenance tasks without the need for complex disassembly or extensive downtime.

2. Adjustable Mounting Positions:

Motor slide rails typically offer adjustable mounting positions, allowing for flexible motor positioning. This adjustability enhances maintenance by providing the ability to fine-tune the motor’s position and alignment. Technicians can easily adjust the motor’s position along the slide rails to optimize belt tension, pulley alignment, or coupling engagement. This ensures proper functioning and reduces the need for frequent maintenance adjustments due to misalignment or wear.

3. Quick Motor Replacement:

In cases where motor replacement is required, motor slide rails simplify the process. By sliding the motor along the rails, it can be easily disconnected from the power source and removed from the system. This makes motor replacement faster and more efficient, minimizing downtime during maintenance or motor failure situations. The slide rails also facilitate the quick installation of a new motor, ensuring a smooth and streamlined maintenance process.

4. Component Accessibility:

Motor slide rails improve access to other components connected to the motor. By sliding the motor along the rails, technicians can easily reach and service components such as motor couplings, pulleys, belts, or gearboxes. This accessibility simplifies maintenance tasks such as lubrication, inspection, or replacement of these components, reducing the time and effort required for maintenance procedures.

5. Modular Design and Replacement:

Some motor slide rail systems feature a modular design, allowing for easy replacement or upgrade of individual components. This modularity enhances maintenance by enabling the replacement of specific rail sections, mounting brackets, or other accessories, without the need for replacing the entire rail system. This reduces maintenance costs and downtime while ensuring the motor slide rails remain in optimal working condition.

6. Compatibility with Diagnostic Tools:

Motor slide rails can be compatible with diagnostic tools and condition monitoring equipment. The ease of access provided by the slide rails allows for the installation of sensors or monitoring devices to track motor performance, temperature, vibrations, or other parameters. This compatibility with diagnostic tools enables proactive maintenance, early fault detection, and efficient troubleshooting, leading to improved motor reliability and reduced downtime.

7. Safety and Ergonomics:

Motor slide rails contribute to maintenance efficiency by enhancing safety and ergonomics. The rails provide a stable and controlled environment for motor maintenance tasks, reducing the risk of accidents or injuries. The ability to slide the motor along the rails significantly reduces the physical strain on technicians, as they can access the motor at a comfortable working height and angle, minimizing fatigue and improving overall maintenance efficiency.

Overall, motor slide rails enhance the ease of maintenance for electric motors through improved access and serviceability, adjustable mounting positions, quick motor replacement, enhanced component accessibility, modular design and replacement options, compatibility with diagnostic tools, and improved safety and ergonomics. These features contribute to streamlined maintenance procedures, reduced downtime, and improved motor reliability, ultimately enhancing the overall performance and longevity of electric motors.

In summary, motor slide rails play a crucial role in enhancing the ease of maintenance for electric motors by providing convenient access, adjustable mounting positions, quick replacement options, improved component accessibility, compatibility with diagnostic tools, and improved safety and ergonomics.

motor base

What is the purpose of motor slide rails in the context of electric motor installations?

In the context of electric motor installations, motor slide rails serve several important purposes. Here’s a detailed explanation:

1. Easy Motor Installation and Removal:

Motor slide rails provide a convenient and efficient method for installing and removing electric motors. These rails are typically mounted on a motor base or mounting platform and allow the motor to slide in and out smoothly. By using motor slide rails, the motor can be easily positioned and secured in place during installation, and later removed for maintenance or replacement without the need for complex disassembly.

2. Precise Motor Alignment:

Motor slide rails facilitate precise motor alignment with the driven equipment. They allow for horizontal adjustment, ensuring that the motor shaft is parallel and co-linear with the driven shaft. This alignment is crucial for optimal performance, minimizing energy losses, and reducing wear and tear on both the motor and the driven equipment. Motor slide rails offer the flexibility to make fine adjustments to achieve the desired alignment, resulting in improved efficiency and reliability.

3. Vibration Damping and Noise Reduction:

Motor slide rails help dampen vibrations generated by electric motors during operation. Vibrations can arise from factors such as motor imbalances, misalignment, or external forces. The use of slide rails with vibration-dampening properties or by incorporating additional vibration isolation mechanisms can reduce the transmission of vibrations to the surrounding structure. This dampening effect improves overall system performance, reduces noise levels, and protects other components from excessive vibrations.

4. Maintenance and Service Accessibility:

Motor slide rails provide easy access to the motor for maintenance and service tasks. By sliding the motor along the rails, technicians can quickly reach various motor components, such as bearings, cooling fans, or electrical connections, for inspection, lubrication, or repairs. This accessibility simplifies routine maintenance procedures, reduces downtime, and improves the overall serviceability of the motor.

5. Flexibility for Motor Positioning:

Motor slide rails offer flexibility in motor positioning within the installation. They allow for adjustments in the motor’s position, both horizontally and vertically, to accommodate specific space constraints or align with existing equipment. This flexibility is particularly beneficial when retrofitting motors into existing systems or when dealing with limited space. Motor slide rails enable customization of the motor’s position to optimize performance and ensure compatibility with the application requirements.

6. Load Distribution and Stability:

Motor slide rails contribute to load distribution and stability in electric motor installations. The rails help distribute the weight of the motor evenly across the mounting platform, preventing excessive stress on specific points. This load distribution improves the overall stability of the motor and reduces the risk of structural damage or misalignment caused by uneven weight distribution.

In summary, motor slide rails serve the purpose of facilitating easy motor installation and removal, enabling precise motor alignment, dampening vibrations, providing accessibility for maintenance and service tasks, offering flexibility in motor positioning, and contributing to load distribution and stability. By utilizing motor slide rails effectively, electric motor installations can achieve improved performance, reduced downtime, and enhanced overall reliability.

China OEM China Wholesalers Rgw45hb Ball Screw CNC Linear Guide Rail with Stepper Motor   vacuum pump brakesChina OEM China Wholesalers Rgw45hb Ball Screw CNC Linear Guide Rail with Stepper Motor   vacuum pump brakes
editor by CX 2024-04-10

China Good quality CZPT 20mm Mini Planetary NEMA 8 Two Phase Stepper Motor brushless motor

Product Description

 

Product Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor; low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Application:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc.

Product Parameters

Planetary Gear Box Specification:

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) ≤0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 ≤1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 ≤1:369

20HS1450 Planetary Gearbox Motor Specifications:

Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 53.4 53.4 60 60 60 66.4 66.4 66.4 66.4 72.8 72.8 72.8
Output torque ( mN.m) 50 70 170 231 328 558 777 1095 1522 1871 2000 2000
Total Weight(g) 91 91 97 97 97 103 103 103 103 109 109 109
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30.0 36.4 42.8
Efficiency 90% 81% 73% 66%

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%

 

Detailed Photos

 

Parameters of Drawing

Company Profile

ZheJiang UMot Technology Co., Ltd. specializes in R&D and sales of stepper motors, servo motors, linear modules and related motion control products, customizing and designing high-quality motor products for users with special needs around the world, and providing overall solutions for motion control systems. Products are exported to more than 30 countries and regions including the United States, Germany, France, Italy, Russia, and Switzerland. The company’s main products and system design have been widely used in automation control, precision instruments, medical equipment, smart home, 3D printing and many other fields.
Our company has been recognized as a high-tech enterprise by relevant departments, has a complete quality management system, has obtained ISO9001, CE, RoHs and other related certifications, and holds a number of electrical patent certificates. “Concentration, Professionalism, Concentration” in the field of automation of motor R&D and system control solutions is the company’s business purpose. “Be your most trusted partner” is the company’s service philosophy. We have always been aiming to “make first-class products with professional technology”, keep pace with the times, innovate constantly, and provide more users with better products and services.

 

FAQ

 

1. Shipping method:
1)International Express delivery DHL&FEDEX &UPS&TNT& 7-10days
2)Shipping by air 7-10 days
3)shipping by sea, delivery time depends on the destination port.

2. Technical Support:
We can provide you with professional technical support. And our products quality guarantee is 6 months. Also, we accept products customized.

3. Why should you buy from us, not from other suppliers?
Professional one-to-1 motor customized. The world’s large enterprise of choice for high-quality suppliers. ISO9001:2008 quality management system certification, through the CE, ROHS certification.

4. How to select models?
Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.

5. Are you a factory?
Yes, we are a factory, and we produce stepper motor/driver, Servo motor/driver.

Application: Precision Medical Instruments
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2
Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China Good quality CZPT 20mm Mini Planetary NEMA 8 Two Phase Stepper Motor   brushless motor	China Good quality CZPT 20mm Mini Planetary NEMA 8 Two Phase Stepper Motor   brushless motor
editor by CX 2023-06-02

China factory NEMA17 with 60mm Body Length Planetary Gearbox Stepper Motor with Cheap Price motor brushes

Product Description

                   
 

              Nema17 with 60mm body length planetary gearbox stepper motor with cheap price

General Specification:

Step Angle  Accuracy: ±5%
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80°C Max
Ambient Temperature: -20°C~+50°C
Insulation Resistance: 100MΩ Min., 500VDC
Dielectric Strength:  1800VAC for 1 second 5mA
Shaft Radial Play:  0.02Max (450g-load)
Shaft Axial Play: 0.08Max (450g-load)

Specification:

Model No. Step Angle Motor Length Current
/Phase
Resistance
/Phase
Inductance
/Phase
Holding Torque # of Leads Mass
( °) (L)mm A Ω mH kg.cm No. Kg
JK42HS60-1704 1.8 60 1.7 3.0 6.2 7.3 4 0.6

Applications:

Used for robots stepper motor,
electronic automatic equipment stepping motor,
medical instrument stepping motor,
advertising instrument stepper motor,
lighting& audio equipment stepper motor,
printer stepper motor, textile machinery stepper motor.
Cnc router stepper motor.

 

Application: CNC Machine
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2
Customization:
Available

|

Customized Request

Motor

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Motor

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Motor

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China factory NEMA17 with 60mm Body Length Planetary Gearbox Stepper Motor with Cheap Price   motor brushesChina factory NEMA17 with 60mm Body Length Planetary Gearbox Stepper Motor with Cheap Price   motor brushes
editor by CX 2023-05-22

China Best Sales NEMA 11 Small Planetary Gearbox Stepper Motor Suit for 3D Printer manufacturer

Product Description

NEMA 11 gearbox stepping motor,NEMA11 planetary gearbox stepper motor, 28MM spur gearbox stepper motor, nema11 geared stepper motor

Descrition:

NEMA11 gearbox stepping motor , 28mm square stepper motor .
28mm planetary gearbox motor ,.
 
Applications:
 
Use for robots stepper motor, electronic automatic equipment stepping motor , medical instrument stepping motor,
advertisementing instrument stepper motor, lighting& audio equipment stepper motor ,printer stepper motor, textile machinery stepper motor.
Cnc router stepper motor.

 About Our Factory and other Products:

 WHY YOU CHOOSE US:

 We are a professional manufacturer for Stepper motor , Stepper driver, BLDC motor and DC motor. we can supply OEM service.  
Our products all with CE and ROHS. 
Welcome you visit our company HangZhou Jingkong Motor&Electric Appliance Co.,Ltd 
 
Depending on advanced technology and CZPT service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price. 
 

High quality . 
Competitive price ,
Good Packing , 
Fast Delivery .
Knight service

Advanced technology
 
 
Believe that we will do our best!

Application: Motor
Hardness: Soft Tooth Surface
Type: Other
Step Angle: 1.8 Degree
Length: 51mm
Place of Origin: Changzhou, China
Customization:
Available

|

Customized Request

Motor

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China Best Sales NEMA 11 Small Planetary Gearbox Stepper Motor Suit for 3D Printer   manufacturer China Best Sales NEMA 11 Small Planetary Gearbox Stepper Motor Suit for 3D Printer   manufacturer
editor by CX 2023-05-06

China high quality Disk Output Precision Planetary Reducer Servo Stepper Motor Special Flange Output Planetary Reducer brushless motor

Product Description

PLANETX planetary reduce
Disc output reducer is widely used in industrial products due to its small size, light weight, large torque, wide speed ratio range, high rigidity, high precision, high transmission efficiency, maintenance free and other characteristics.
The planetary reducer structure is composed of a sun gear and a planet gear to form an external mesh, and a planet gear and an internal gear ring to form an internal mesh, so that the planet gear can realize revolution while realizing self rotation and maximum transmission of guarantee force; The minimum speed ratio of single-stage reduction is 3, and the maximum speed ratio is generally not more than 10. Common reduction ratios are 3, 4, 5, 6, 7, 8, and 10. The number of reducer stages is generally not more than 3, and the speed ratio is not more than 1.
Most planetary reducers are used with servo motors to reduce speed, increase torque, increase inertia, and ensure return accuracy (the higher the return accuracy, the higher the price). The maximum rated input speed of planetary reducers can reach 12000 rpm (depending on the size of the reducer itself, the larger the reducer, the smaller the rated input speed), and the operating temperature is generally between – 40 ºC and 120 ºC.

 

  Model

Unit PLH064A
PZH064A
PLH090A
PZH090A
Ratios(i)  
 
Stages
 
 
Rated output torque

Nm

16.5 63 3

1-stages

26 90 4
28 100 5
20 68 7
12.5 43 10
19.5 75 9            

2-stages

31.5 110 12
31.5 110 16
31.5 110 20
33.5 120 25
31.5 110 28
33.5 120 35
31.5 110 40
33.5 120 50
24 81 70
37.5 130 80
37.5 130 100

3-stages

40 145 125
37.5 130 140
40 145 175
37.5 130 200
40 145 250
37.5 130 280
40 145 350
37.5 130 400
40 145 500
28 95 700
18.8 62 1000
Max.output
torque
Nm 2/2*Nominal torqute

Backlash arcmin <4 <4 P1 1-stages
<8 <8 P2
<8 <8 P1 2-stages
<12 <12 P2  
<10 <10 P1 3-stages
<14 <14 P2
NO-load torque NM 0.18 0.6   1-stages 
0.17 0.55   2-stegas
0.16 0.5   3-stegas

 

HangZhou Planetx Transmission Equipnenit Co,Ltd
is based on the global industrial automation field. it is
saies of planetary reducers, hollow rotary platforrres, 
a manufacturer specializing in R&D, production and
  and special reducers. It belongs to “National High-tech 
 
Enterprise”. The headquarters and production center are located in HangZhou City,ZheJiang Province, which is known as the “world factory”, and there are service centers and transit warehouses in ZheJiang . ZheJiang ,HangZhou and other places.
The company’s core team members have more than 10 years of experience in the transmission industry and gear processing industry, and are good at solving a variety of internal and external gears and processing solutions. The company has summed up a complete set of “transmission quality management system” to ensure the relative accuracy of each component after combination,and provide high pass rate and high efficiency guarantee for the whole machine to leave the factory. We use advanced computer software for design and demonstration,combined with years of experience in mechanical transmission and motion
control, to provide global motion and control solutions. Our products have the characteristics of high precision, large bearing torque, long life, low noise, stable operation, strong versatility and maintenance-free Quality is the foundation of enterprise survival. We provide the market with stable and high-quality products and provide more optimized automation
solutions. Always take “user demand” as the business purpose of the enterprise, take “scientific and
technological innovation” as the foundation of the company’s development, and implement the Iso
quality management system operation into all aspects of the company.
Our products are widely used in aerospace,CNC machine tools, cutting and welding equipment,textile printing and dyeing machinery packaging machinery, food machinerymedical machineryships,radardata communication systems,robots,robotic arms, CZPT materials equipmentprecision testing
Instruments, testing machines,plastic machinery, glass machinery,coal mining machinery,lifting machinery, metallurgical machinery,construction machinery and other fields.
The process of our pursuit of success is the process of continuous sublimation of our relationship with you. The success of the company is inseparable from the long-term support and help of many customers and friends. Facing the future, we will serve you more. HangZhou Planetx Transmission Equipment Co.,Ltd. will go hand in hand with you to create brilliant!

The company has long been guided by the business policy of ‘technological progress as the guide, quality improvement as the main line, fully optimizing the overall quality of enterprises, and seeking development in meeting social needs’
Q: How to get a quick quote
A: Please provide the following information when contacting us

  1. Motor brand
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your delivery date
A: We all install it now, but it takes 7 days if it is not non-standard. Non standard 15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand

 

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Mechanical Process
Match Machine: Spinning Equipment
Material: Metal
Processing Level: Precision Finishing
Customization:
Available

|

Customized Request

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China high quality Disk Output Precision Planetary Reducer Servo Stepper Motor Special Flange Output Planetary Reducer   brushless motor	China high quality Disk Output Precision Planetary Reducer Servo Stepper Motor Special Flange Output Planetary Reducer   brushless motor
editor by CX