45mm DC CZPTal World Equipment Motor with Lengthy Daily life
Gearbox knowledge:
Number of stages | 1stages reduction | two phases reduction | 3 stages reduction | four levels reduction | five stages reduction |
Reduction ratio | 3.seven,5.two | 13.7,19.2,26.nine | fifty.9,seventy one.2,ninety nine.5,139 | 188,264,369,516,721 | 669,977,1367,1911,2672,3736, |
gearbox duration ” L” mm | 26.4 | 32.6 | 38.nine | 45.three | fifty two.5 |
Max.Working torque | 3.0Kgf · cm | six.0Kgf · cm | 8.0Kgf · cm | 12.0Kgf · cm | 20Kgf · cm |
Max. Equipment breaking torque | 9.0Kgf · cm | eighteen.0Kgf · cm | 24Kgf · cm | 36Kgf · cm | 60Kgf · cm |
Max. Gearing effectiveness | ninety% | 81% | 73% | sixty five% | fifty nine% |
Motor knowledge:
Motor name | Rated volt.v | No load | Load torque | Stall torque | |||||
Existing | Velocity | Existing | Speed | Torque | Output power | Torque | Present | ||
mA | r/min | mA | r/min | gf · cm | W | gf · cm | mA | ||
TG-38123400 | 12 | ≤40 | 3400 | ≤180 | 2500 | forty | one. | a hundred and sixty | 720 |
TG-38124500 | 12 | ≤50 | 4500 | ≤350 | 3300 | sixty | two. | 210 | 1400 |
TG-38126000 | 12 | ≤70 | 6000 | ≤720 | 4500 | eighty | 3.6 | 300 | 2800 |
TG-38243000 | 24 | ≤15 | 3000 | ≤80 | 2200 | forty | .9 | a hundred and forty | 320 |
TG-38244500 | 24 | ≤25 | 4500 | ≤180 | 3300 | 60 | 2. | 200 | 730 |
TG-38246700 | 24 | ≤45 | 6700 | ≤360 | 4500 | 80 | three.6 | three hundred | 1400 |
1,This table lists some motors parameters, others make sure you refer to specific parameters of tg-38-1.htm. 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput speed:motor pace / reduction ratio. |
NOTE: |
1, Gearmotor named approaches: e . g . PG36M528123000-ninety nine.5K Motor please refer to the motor data TG-38123000. Gearbox you should refer to gearbox information reduction ratio99.five .Associated to gearmotor output velocity and torque please refer to motor info. 2, Motor can be installed wiht magnetic encorder. encorder parameters you should refer to me-32.htm. 3,CZPT output shaft soon after decreasing: dia8.0mm. other sizes of then output shaft can make as shopper request. 4,Chart only for reference,goods shall prevail the entity. |
Firm Introduction