Servo motor!  
Preserve strength in 50%!  Efficiency up forty%!atmosphere security

 Energy-Preserving Motor/Servo Motor/Electronic Adjustable-Velocity Motor (DSV-1)
Can be utilised to a lot of kinds of industrial sewing equipment this sort of as garment, bag, box sewing. Low vibration and noise, reduced temperature increase, lengthier operating life, smaller sized & lighter, a lot more critical, Reduced power use (saving electrical power by 60 to eighty% in comparison with clutch motors)
Immediate driver, simple match, stunning, no sound, environment defense.

Manu
The Fourth, Recommendations of the control panel:
one. Every important goal:
(one) “P” essential
This key has two utilizes : The first use is to immediate press “P” key to swap up or down needle placement, if up pinhole lamp lights indicates up needle position, if down pinhole lamp lights implies down needle situation, if two lamps off signifies no needle place.
The second use is: Operate Enter button, below level 2 are explained below.
    “S” crucial
This button also has two uses : The 1st use is to simply push “S” key to off or on lamp on the head.
The 2nd use is to purpose parameters ( validate ) essential, level 2 are described underneath .
“+” “-” important
 These two keys are utilized to change speed.

(two) To enter the parameter technique of operation:
     Example: How to modify the motor from clockwise to Counterclockwise
     The 1st step: Open the electricity
     Step two: Push the “P” essential, no go away, and use the other hand press the “+ ” essential , the screen will display the P-00
     The 3rd stage: push “+” crucial, the display screen will show P-01, and then push the “+” essential once more, the monitor will exhibit P-02, (P-02) is a motor clockwise or Counterclockwise parameters (widespread parameter list has).
     Step Four: Now press “P” key (enter into parameter) screen will show “one”
     Fifth phase:  press ” – ” essential, change “1 “to “”
( “one” clockwise ” ” for the counter-clockwise , frequent parameters list has ) .
     Step Six: Push the “S” essential to establish the parameters, conserve and exit the parameter.

three. Restore factory settings:
     Restore factory settings : Push the “P” key, no go away, and use the other hand press the “+ ” essential , the monitor will display the P-00, then push “S” important 3 seconds, it will Restore manufacturing facility options.